HPE warns of more self-destructing disk drives

By on
HPE warns of more self-destructing disk drives

Hewlett Packard Enterprise is warning that some of its SAS solid state drives would prematurely fail after 40,000 hours of operations, and is urging customers to upgrade the firmware.

40,000 hours of operations is equivalent to 4 years, 206 days, 16 hours.

As the SSDs are manufactured by an OEM, HPE warns that the issue could potentially affect other vendors and customers.

The issue is unrelated to a similar incident in November 2019, where the failure would happen after 32,768 hours of operation.

“This HPD7 firmware is considered a critical fix and is required to address the issue. HPE strongly recommends immediate application of this critical fix,” the support bulletin read.

“Neglecting to update to SSD Firmware Version HPD7 will result in drive failure and data loss at 40,000 hours of operation and require restoration of data from backup if there is no fault tolerance.”

The SSD models affected are used in a number of HPE server and storage products, i.e. HPE ProLiant, Synergy, Apollo 4200, Synergy Storage Modules, D3000 Storage Enclosure, StoreEasy 1000 Storage.

Some platforms meanwhile are not affected, including 3PAR StoreServ Storage, D6000/D8000 Disk Enclosures, ConvergedSystem 300/500, MSA Storage, Nimble Storage, Primera Storage, SimpliVity, StoreOnce, StoreVirtual 4000/3200 Storage, StoreEasy 3000 Storage, XP Storage, and SAP HANA.

The firmware update is available to download in the HPE support bulletin.

Got a news tip for our journalists? Share it with us anonymously here.
Copyright © CRN Australia. All rights reserved.
Tags:

Most Read Articles

Log In

Username / Email:
Password:
  |  Forgot your password?